Courage–MFTWSC #144

 


Hi, everyone, I’m back again with this week’s MFT Wednesday Sketch Challenge! Are you ready? Here’s this week’s sketch. All of the details about the sketch challenge are available on the MFT blog as well as in the weekly newsletter. The Design Team will be on hand to provide plenty of inspiration to get you started.



I started this card with a Primitive Cream card stock base. Then I trimmed a Kraft card stock layer and cut out Die-namics Peek-a-Boo Chevrons on the side. I adhere some Jellybean Green card stock on the base so it would show through the chevrons and popped the layer up on foam. Then I cut out a Die-namics Vertical Greetings die cut and stamped it with a sentiment from the coordinating set, DC Vertical Greetings, with Kraft ink and popped that up on foam as well. Next I cut the oak leaf and a couple of acorns from Die-namics LJD Fall Foliage and stamped them with their coordinating images. I used Jellybean Green ink for the leaf and rocked and rolled the edges. The acorns were done with Kraft ink and Hot Fudge ink. I used the rock and roll technique on the leaf, then tied them all together with hemp cord. I adhered that with hot glue and finished off with some enamel dots. Thinking I might need an enamel dot intervention? Nah, I love ‘em too much :)

The inside has another sentiment from DC Vertical Greetings.




And that’s it! Hope to see you back tomorrow for Day Two Teaser!

~Supplies~
Stamps: DC Vertical Greetings, LJD Fall Foliage (MFT)
Paper: Primitive Cream card stock, Jellybean Green card stock, Kraft card stock (MFT)
Ink: Kraft ink, Jellybean Green ink, Hot Fudge ink (MFT); Cajun Craze (SU!), Vintage Photo Distress Ink (Ranger)
Accessories/tools: Vagabond; Die-namics Peek-a-Boo Chevrons, Die-namics LJD Fall Foliage, Die-namics Vertical Greetings, hemp cord (MFT); foam tape, enamel dots

Snowflake Splendor–MFT October Teaser, Day One

Hi, all! Today is the first day of MFT October Teasers! Today we’re previewing Lisa Johnson Designs Snowflake Splendor, Lisa Johnson Designs Snowflake Splendor Die-namics, Blueprints 8 Die-namics, Pure Innocence Trim the Branches Snowman, and Swiss Dots Stencil. Be sure to check out the MFT Blog for all the details and mark your calendars: release is October 8th at 10 PM.




I have a couple of cards for you today using LJD Snowflake Splendor and Die-namics LJD Snowflake Splendor. My first one is kinda rustic. I started with a Primitive White card stock base. Then I stamped the snowflake images on Kraft card stock with Whip Cream pigment ink and heat embossed them. I stamped the sentiment with Steel Gray ink, trimmed the panel down, matted it with Wild Cherry card stock and tied around red and black cord before popping it up on foam.

The inside has another sentiment from the set.


*****

For my second card,  I started with a Sno Cone card stock base and added a Sweet Tooth card stock layer that had been partially embossed with another new product this month: Die-namics Swiss Dots.



I stamped part of the sentiment on the bottom of the Sweet Tooth card stock layer, then stamped the rest on a strip of card stock and popped it up on foam. I cut out two of the Die-namics LJD Snowflake Splendor snowflakes and stamped them with their coordinating images using yet another new product this month: Nightshift Blue ink!! Yay! To finish it off, I added a few enamel dots.

The inside of this card also has a sentiment from the set.

 


And that’s it for Day One Teaser! Thanks so much for stopping by!

 

~Supplies~
Hello Friend Card:
Stamps: LJD Snowflake Splendor (MFT)
Paper: Primitive White card stock, Wild Cherry card stock, Kraft card stock (MFT)
Ink: Whip Cream pigment ink, Steel Gray ink (MFT)
Accessories/tools: embossing powder, heat tool, foam tape, red/black twine

 

Let It Snow Card:
Stamps: LJD Snowflake Splendor (MFT)
Paper: Sweet Tooth card stock, Sno Cone card stock (MFT)
Ink: Nightshift Blue ink (MFT)
Accessories/tools: Vagabond; Die-namics LJD Snowflake Splendor, Die-namics Swiss Dots (MFT); enamel dots, foam tape

Sunflower Friend–CTD #262

Hey, there Color Throwdown fans! It’s time for another challenge and Wanda has knocked this one out of the park! Love these colors based on her awesome inspiration piece!!




’Course, I love anything FALL, so I *would* love it :) I started with a Smoky Slate card base, then stamped my patterned paper on Primitive White card stock using LLD Mod Borders and the challenge colors. I stamped the sentiment, from Inspired by Flowers Set #3, with Steel Gray ink, then tied around some silver cord. I thought the silver would tie in with the gray base and I like how it does.

I created a Die-namics Sunflower and Die-namics Royal leaves, popped it up on foam, and finished off with some enamel dots. I do so love those things!!

The inside has another sentiment from the set.

And that’s it from me! Remember, you do not have to have the exact colors to play the Color Throwdown challenge. If you don't, just use the closest you have. So, c'mon over to the Color Throwdown blog and play along with us this week. Please use the link service to post your card and please link directly to your card so we can find it easily. And please include a link in your post to the Color Throwdown. If you upload your card to a public forum, please use the keyword CTD262 so we can see your beauty all in one place. Hope to see you there! Be sure to check out what the other team members have come up with this week, including our fabulous October Guest Designer, Sankari Wegman!

Barbara Anders (<--- You are here!)   
Broni Holcombe
Joan Ervin
Lori Tecler
Melody Rupple
Tammy Hershberger
Vickie Zimmer
Wanda Cullen
Sankari Wegman – October Guest Designer

Thanks so much for stopping by today!

~Supplies~
Stamps: Inspired by Flowers Set #3, LLD Mod Borders (MFT)
Paper: Primitive White card stock (MFT); Smoky Slate, Crushed Curry, Garden Green, More Mustard, Riding Hood Red (SU!)
Ink: Steel Gray ink (MFT); Vintage Photo Distress Ink (Ranger)
Accessories/tools: Vagabond; Die-namics Sunflower, Die-namics Royal Leaves (MFT); silver cord, enamel dots, foam tape