Wednesday, April 20, 2016

My Favorite Things and Xyron

Print

Hello, everyone, I’m so excited to be participating in this collaboration between MFT and Xyron! My project was done with the awesome help of the ezLaminator and I could NOT be happier with the way it turned out.

xyroncolab3_2016apr20

I’d had in mind to do a Peerless Watercolors swatch book for a while and I just figured I’d get some laminating pouches for it. I’m sure that would have worked but I’m also sure it would not have been as easy—or as much fun--to do compared to the ezLaminator, or turn out as professional looking. I’m going to show you exactly how I did it but I must warn you there are lots of photos so get your favorite cuppa and settle in :)

I wasn’t sure I’d use
Peerless Watercolors at first—I had Zig markers, I had ink refills, I had Kuretake watercolors…did I need Peerless? The answer is a resounding YES! I found I love Peerless but before I was going to jump all in I decided to give them a thrifty trial period so I bought this portfolio on Etsy and you can tell it’s been well used.

xyroncolab1_2016apr20

These squares are about 1” in size and I soon found out they were not large enough for the level of use they were going to get from me. You can also see that when trying to get every.last.bit of color off the swatch, I often made a mess on the base, which was watercolor paper.

xyroncolab2_2016apr20

This was a great way to find out if I was going to love them or not and it also gave me some valuable information for my project. First, I found I wanted larger swatches and second, my swatches needed to be mounted on something that could be wiped clean if I overshot the swatch. Hence my thoughts to laminate.

I also knew I didn’t want to put them in a hard cover notebook or in any kind of pocket that would require removing them and putting them back. When I spied this watercolor tablet at a craft store I knew that was the way to go. It would fit in the handy space in which I kept my Etsy version and I could take it apart and use my Bind It All to make the laminated sheets work.

xyroncolab10_2016apr20

The first thing I did was draw a rough image of one of the sheets on my grid paper and figured out how many 2” square swatches I could fit on one sheet. I knew I wanted the name and a sample of the color included so I did some math and used some trial swatches to figure it out.

xyroncolab14_2016apr20

Once I had that figured out, I lined off the separate areas for 6 swatches and samples on each page.

xyroncolab15_2016apr20

The next thing to do was get my swatches prepped. There are a few duplicates in a couple of these packs and I ended up with 61 colors. At 6 per page I’d need 10 pages—I couldn’t see laminating one color so I kept Flesh out and will add that to a page if I get more colors in the future.

xyroncolab13_2016apr20

I knew from experience that color dust falls off the sheets and I didn’t want to contaminate my main paper cutter so I bought this cheapy just for this project—I think it was under $4 and well worth it to contain the dust.

xyroncolab12_2016apr20

I marked my swatches with the name in two places and cut 2” square swatchs.

xyroncolab16_2016apr20

To show what I mean about the dust, I washed my little cutter when I was finished and here’s what the water looked like. The color on Peerless paper is very concentrated so a little dust in the wrong place can ruin a project.

xyroncolab18_2016apr20

Once my swatches were all cut I set about arranging them into color families. To do this, I used a sheet I’d messed up to just do a small sample so I could see exactly what the color looked like—it’s very hard to determine that by just looking at a swatch and this was my worksheet for that.

xyroncolab19_2016apr20

Next I typed up the color names, printed them off, and cut them in narrow strips.

xyroncolab20_2016apr20

I adhered them to the swatch area and did a sample underneath it using a small water brush.

xyroncolab21_2016apr20

And now the fun part—laminating! I’ll show you exactly how the ezLaminator works in a bit but here’s the first sheet right out of the machine—gloriously laminated!! So smooth and neat and the name and sample are completely protected. An added bonus is you can use the back of a laminated sheet for mixing shades if you need to and simply wipe it right off!! Can you tell I’m thrilled with this?

xyroncolab6_2016apr20

Next I did a preliminary trim of the laminate material and went about punching the holes at the top. I quickly found the holes were not exactly the same size as my Bind It All would make—luckily the spacing was perfect, though, so I trimmed off the old holes and made new ones—problem solved!

xyroncolab22_2016apr20

And here’s that sheet with the swatches mounted with tape runner. Once a color is used up its a simple matter to remove the spent one and add a new one. I’m not sure if you can tell or not, but I ended up trimming the laminate material right up to the watercolor paper all the way ‘round. I tested it first and believe me, it will NOT come off!

xyroncolab23_2016apr20

My worksheet was also my test sheet—it’s where I tested the hole punching, the actual laminating process, and the trimming-close-to-the-paper thing.

xyroncolab9_2016apr20

At one point I looked at it and it occured to me that having a sheet like it with small samples of color would be great to have in the front as a kind of “Table of Contents”. It would allow me to choose the color I wanted quickly without flipping through the whole book, with the inherent risk of dropping color dust. Once my color was chosen, I could go directly to that page and see the large sample. So, that’s what I did. I printed off the names again, adhered them all to one sheet and laminated it.

The laminating process with the
ezLaminator is VERY simple. You place your item on the tray (which is stored in the machine when not in use), push it firmly in until you feel resistance, and crank the wheel. No electricity needed so you can use it anywhere!!

xyroncolab7_2016apr20

It comes out the other side and there’s a cutting blade on a track to cut the sheet off the roll. And this blade cuts like a hot knife through butter—it glides along it’s rail and right through the laminate material. Then it’s a simple matter of trimming it to suit your needs.

xyroncolab8_2016apr20

Once I finished all the sheets I created a cover using Watercolor Paper Pad, Rainbow of Happiness Stamp Set, Color the Rainbow Die-namics, Puffy Clouds Die-namics, Radiant Sun Die-namics, Stitched Rainbow Die-namics, and Peerless Watercolors. I don’t show it but I also added a heavy chipboard back to provide support.

xyroncolab3_2016apr20

I also thought it would be nice to have index tabs on the side of the book, again to avoid too much flipping through the pages.

xyroncolab24_2016apr20

To do this, I cut some swatches of MFT card stock that most closely would match the general color range of each page, lightly adhered them to a piece of Watercolor Paper Pad (they need to be adhered so they don’t move as they’re introduced into the machine) and laminated the sheet.

xyroncolab27_2016apr20

I think that red arrow means I’m getting close to running out--I’m thrilled with getting the whole project done with just the material that came loaded in the machine!

xyroncolab26_2016apr20

After it was laminated, I cut tabs using Blueprints 15 Die-namics. Keep in mind I have two layers of laminate material, one layer of watercolor paper, and a layer of card stock. The die cut through about 95% of the way and it was easy to use my craft knife to finish it off.

xyroncolab25_2016apr20

I adhered the tabs with Scotch Permanent Tacky Glue and it was DONE!!

xyroncolab5_2016apr20

Thank you Xyron for making my Peerless Watercolors swatch book a complete success!! It took a little time to design and create but I love using it and it will last me forever so it was time well spent.

Thanks for stopping by! I hope I’ve got you thinking of some good ideas for using an
ezLaminator—I already have a list…


1springsupplies



~Supplies~
Stamps:
Rainbow of Happiness (MFT)
Ink:
Black Licorice hybrid ink (MFT)
Paper:
Daffodil card stock, Orange Zest card stock, Brick Red card stock, Coral Crush card stock, Pure Plum card stock, Purple Rain card stock, Lush Lagoon card stock, Green-Eyed Monster card stock, Jellybean Green card stock, Latte card stock, Ranger Watercolor Paper, Watercolor Paper Pad (MFT)
Accessories/tools: Vagabond;
Color the Rainbow Die-namics, Puffy Clouds Die-namics, Blueprints 15 Die-namics, Radiant Sun Die-namics, Stitched Rainbow Die-namics, Peerless Watercolors, Scotch Permanent Tacky Glue, small waterbrush (MFT); ezLaminator (Xyron), Bind It All

1springsignature

16 comments:

  1. Great idea to create a notebook that serves as a great reference on supplies and so well crafted!

    ReplyDelete
  2. Does MFT carry the Pretty in Pinks peerless colors???
    Thank you.

    ReplyDelete
    Replies
    1. Hi, Karen, no, they don't--I ordered that directly from Peerless.

      Delete
  3. OMGosh, this is freakin' FAAAAANTASTIC!

    ReplyDelete
  4. Look at you!!! This is amazing Bar. What a great tool.

    ReplyDelete
  5. I've been on the hunt for the best way to store (and use) my peerless watercolors for a while now and this is by far the best project I found. well thought and well done! Thanks for sharing!

    ReplyDelete
  6. Wow, this is most impressive and your tutorial has so many practical tips included! Well done! I haven't used Peerless watercolors yet but love the more intense shades they allow!

    ReplyDelete
  7. OMG Barbara, "Are you my TWIN?" LOL
    This is SO like something I would DO!!! I don't usually read such a long 'written'post but this one "had to be done"! LOL I have NOT been able to find Peerless water colours yet in my local area but when I do... I LOVE how you made you book and I will def. be doing this! TFS! PINNING!

    ReplyDelete
  8. Your tutorial on this wants me to buy the Peerless watercolors.

    ReplyDelete
  9. Dear Barbara...thank you SOOOO MUCH! My Peerless goodies are in the post so your ideas will be a wonderful help to me.

    ReplyDelete
  10. Wow. Your swatch book is amazing. Thanks for the tutorial. Also, love your coloring on the cover.

    ReplyDelete
  11. I want to make one of these. I'm wondering if you might consider showing each of your pages for us to CASE? I don't have all of the colors yet, but would love to make the swatch book all at once. Then I could just leave blank the ones I don't have yet, and fill them in when I get them. Thank you so much, again, for the inspiration to get organized!

    ReplyDelete
    Replies
    1. Karen, I'm glad you like my swatch book! I will be glad to do a blog post with every page for reference--I was going to do that in this post but it was already so long I decided not too. I'll get it done within the next two weeks so just keep an eye on my blog--I've put it on my calendar ;-)

      Thanks for stopping by!
      Barbara

      Delete
    2. Thank you, Barbara, so very much. I will definitely keep looking. I've started gathering supplies - still need to buy the Pinks and the mini cutter. This will be so helpful - I really appreciate it.

      Delete
  12. Barbara, this was exactly what I needed! Thank you so much! I need this to take my watercolors with my on a trip! You are an angel! ezlaminator here I come!

    ReplyDelete
  13. This is a must do!!!!!! Thank you so much for sharing!!!

    ReplyDelete

Thank you for your kind comments--they make my day and I appreciate every one!