Friday, November 28, 2014

MFT December Release Countdown, Day Five

releasecountdownday5_2014nov28

Hi, all, and welcome to Day Five of MFT’s December Release Countdown! No, you haven’t missed anything--this month we have five Release Countdown days. Release is on December 2nd at 10pm so mark your calendars—get all the details on the MFT Blog.

Today we’re showing you Blueprints 21 Die-namics, LJD Whimsical Wishes, LJD Peek-a-Boo Circle Windows Die-namics, PI Roarin' Good Day, and PI Roarin' Good Day Die-namics.

NewReleaseCountdown_Day5

I have two cards for you today, using several of the new products. The first one is using LJD Whimsical Wishes—the design of which is a bit of a departure for Lisa, but one that I think you’ll agree she’s done well! I just LOVE those scribbles! I started with a Sweet Tooth card stock base and stamped the long straight line drawing along the edge with Black Licorice hybrid ink. Then, on another piece of Sweet Tooth card stock I stamped the scribbles, again with Black Licorice hybrid ink because I knew I was going to “watercolor” them and MFT hybrid inks are water proof.

Then, using a water brush, I colored the large circles with, top to bottom, Orange Fizz dye ink, Razzle Berry dye ink, and Lemon Drop dye ink. The smaller scribbles were done by stamping only one instance from a row, over and over. I trimmed that panel down, edged it with a strip of Black Licorice card stock and popped it up on the base. The sentiment, also from LJD Whimsical Wishes, was stamped on Black Licorice card stock with Sweet Tooth pigment ink and heat embossed with white embossing powder. I popped that up on foam and finished off with some enamel dots.

On the inside, I stamped the complete row of small scribbles and colored them to match the front, then finished off with the sentiment.

releasecountdownday5_2014nov28in
*****

My second card uses Blueprints 21 Die-namics, PI Roarin' Good Day, and PI Roarin' Good Day Die-namics, along with a couple of other soon-to-be-released products.

releasecountdownday5b_2014nov28

I started with a Black Licorice card stock base, then stamped up the new Zebra Background on some Sweet Tooth card stock, cut it out with the large die from Blueprints 21 Die-namics and popped it up on foam. I then created a little scene, starting with a piece of Berrylicious card stock, by cutting the semi-circle of holes and the two sun layers, all from Blueprints 21 Die-namics.

Then I added the jungle greenery, using Wild Greenery Die-namics, cut from a new color of cardstock, Limelight card stock (YES!! we have new colors!!!!) and Jellybean Green card stock, and the ground was made using Kraft card stock and Stitched Snow Drifts Die-namics. Next I cut PI Roarin’ Good Day Die-namics from X-Press It Blending Card, stamped it with PI Roarin’ Good Day and Black Licorice hybrid ink, and colored it with Copic markers. I popped it up on foam, added the sentiment, stamped on Black Licorice card stock with Sweet Tooth pigment ink and heat embossed with white embossing powder, then popped it up on foam to finish it off.

Another sentiment from the set was stamped on the inside.

releasecountdownday5b_2014nov28in


And that’s it for today! Hope to see you back tomorrow for Day Four of MFT’s December Release Countdown!


1CAS Supplies2 



releasecountdownday5_2014nov28



releasecountdownday5b_2014nov28


~Supplies~
Stamps: LJD Whimsical Wishes (
MFT)
Ink:
Black Licorice hybrid ink, Orange Fizz dye ink, Razzle Berry dye ink, Lemon Drop dye ink, Sweet Tooth pigment ink (MFT)
Paper:
Sweet Tooth card stock, Black Licorice card stock (MFT)
Accessories/tools: foam tape, white embossing powder, heat tool, enamel dots

~Supplies~
Stamps: PI Roarin’ Good Day
, Zebra Background, Burlap Background (MFT)
Ink:
Lemon Drop dye ink, Black Licorice hybrid ink, Sweet Tooth Pigment ink (MFT)
Paper:
Black Licorice card stock, Sweet Tooth card stock, Berrylicious card stock, Limelight card stock, Jellybean Green card stock, Kraft card stock, Lemon Drop card stock, X-Press It Blending Card (MFT)
Accessories/tools: Vagabond; Blueprints 21 Die-namics,
Stitched Snow Drifts Die-namics, PI Roarin’ Good Day Die-namics, Wild Greenery Die-namics (MFT); Copic markers, foam tape, white embossing powder, heat tool

1CAS Signature2

16 comments:

  1. Such cute cards. I am partial to florals so that great card really appeals to me with those lovely bright colours.

    ReplyDelete
  2. Love the colours and simplicity of the first card and the
    great coloring of the second!

    ReplyDelete
  3. The Let's Go Wild card is adorable! I love the jungle look behind the PI child!!!

    ReplyDelete
  4. Awesome cards! I'm in love with the new Whimsical Wishes. The sentiments are great & the lines will work with anything. Thanks for showing how you finished the inside. Lovely!

    ReplyDelete
  5. Love the new leaf dies and that adorable little tiger.

    ReplyDelete
  6. This is so cute lo e life e love it...

    ReplyDelete
  7. These are both fabulous! I really like how you finish the insides of your cards too. Thanks for the inspiration.

    ReplyDelete
  8. Great cards. The sentiments are great, as always.

    ReplyDelete
  9. I am loving the graphic style of the first one! Fantastic cards!!

    ReplyDelete
  10. Super cute card - love the CAS look of the first one and the little tiger suit on the second.
    isoscia at aol dot com

    ReplyDelete
  11. Love the CAS look of the scribbles from whimsical wishes.

    ReplyDelete
  12. Very nice cards. The little tiger card is adorable.

    ReplyDelete

Thank you for your kind comments--they make my day and I appreciate every one!

LinkWithin

Related Posts Plugin for WordPress, Blogger...